KTM 50 SX 2019 User Manual

TUNING THE ENGINE 15
99
H01479-10
Condition
If there is no reference point:
–
Turn adjusting screws
2
counterclockwise to the last
detectable click.
–
Turn adjusting screws
2
clockwise by 9 clicks to the
basic setting.
Guideline
Basic setting of slip speed 8,700 … 9,300 rpm
Info
The springs may not be pretensioned by more than
17 clicks from the stop using the adjusting screws.
Condition
If the slip speed is too low:
–
Turn adjusting screws
2
clockwise.
Guideline
1 click increases the slip
speed by
250 … 350 rpm
Info
The springs may not be pretensioned by more than
17 clicks from the stop using the adjusting screws.
Condition
If the slip speed is too high:
–
Turn adjusting screws
2
counterclockwise.
Guideline
1 click decreases the slip
speed by
250 … 350 rpm
Finishing work
– Install the clutch cover. ( p. 99)
– Check the gear oil level. ( p. 101)
– Check the clutch setting. ( p. 97)
15.11 Installing the clutch cover
H01458-11
Main work
–
Position clutch cover
1
with the seal ring.
–
Mount and tighten screws
2
.
Guideline
Screw, clutch cover M6 10 Nm (7.4 lbf ft)
Finishing work
– Check the gear oil level. ( p. 101)

KTM 50 SX 2019 Specifications

General

Brand	KTM
Model	50 SX 2019
Category	Motorcycle
Language	English