EasyManuals Logo
Home>KTM>Motorcycle>50 SX 2019

KTM 50 SX 2019 User Manual

KTM 50 SX 2019
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
SERVICE WORK ON THE CHASSIS 11
59
H01432-10
Main work
Press rear holding lug
1
together slightly and swing the air
filter box cover upward.
Pull out the front holding lug and take off the air filter box
cover.
Take off the air filter.
11.25 Installing the air filter
H01477-10
Main work
Position the clean air filter.
Position the rear holding lug. Lower the air filter box cover and
allow the front holding lug
1
to snap in.
Info
If the air filter is not mounted correctly, dust and dirt
may enter the engine and result in damage.
Finishing work
Mount the seat. ( p. 58)
11.26 Cleaning the air filter and air filter box
Note
Environmental hazardHazardous substances cause environmental damage.
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
Do not clean the air filter with fuel or petroleum since these substances attack the foam.
Preparatory work
Remove the seat. ( p. 58)
Remove the air filter. ( p. 58)
M01457-01
Main work
Wash the air filter thoroughly in special cleaning liquid and
allow it to dry properly.
Air filter cleaner ( p. 127)
Info
Only press the air filter to dry it, never wring it out.
Oil the dry air filter with a high-grade air filter oil.
Oil for foam air filter ( p. 127)
Clean the air filter box.
Check intake flange for damage and looseness.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 50 SX 2019 and is the answer not in the manual?

KTM 50 SX 2019 Specifications

General IconGeneral
BrandKTM
Model50 SX 2019
CategoryMotorcycle
LanguageEnglish

Related product manuals