KTM 50 SX 2019 User Manual

13 WHEELS, TIRES
86
Warning
Danger of accidents Damaged brake discs reduce the
braking effect.
– Always lay the wheel down in such a way that the
brake disc is not damaged.
– Take the rear wheel out of the link fork.
Info
Do not operate the foot brake lever when the rear wheel
is removed.
H00936-12
–
Remove spacers
5
.
13.4 Installing the rear wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
– Always keep the brake discs free of oil and grease.
– Clean the brake discs with brake cleaner when necessary.
H01199-10
Main work
– Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
– Change the rear wheel bearing.
–
Clean and grease the contact surfaces
A
of the spacers.
Long-life grease ( p. 127)
– Insert the spacers.
Info
Insert the wide spacer on the left in the direction of
travel.
V00281-12
–
Clean and grease wheel spindle
1
.
Long-life grease ( p. 127)
– Position rear wheel and mount the chain.
The brake linings are correctly positioned.
–
Insert wheel spindle
1
with washer
2
.
–
Position washer
3
. Mount nut
4
, but do not tighten it yet.
– Make sure that the chain adjuster support plates are in contact
with the adjusting nuts.
– Check the chain tension. ( p. 63)

KTM 50 SX 2019 Specifications

General

Brand	KTM
Model	50 SX 2019
Category	Motorcycle
Language	English