9 SERVICE SCHEDULE
28
Every 80 operating hours
Every 40 operating hours
Every 20 operating hours
Once after 10 operating hours
Clean the air filter and air filter box. ( p. 51) ○ ● ● ●
Change the glass fiber yarn filling of the main silencer. ( p. 52) ● ● ●
Service the fork. ● ●
Perform the shock absorber service. ●
Check the tightness of the easily accessible, safety-relevant screws and nuts. ○ ● ● ●
Check the idle speed. ○ ● ● ●
Final check: Check the vehicle for safe operation and take a test ride. ○ ● ● ●
Make a service entry in the KTM Dealer.net. ○ ● ● ●
○ One-time interval
● Periodic interval
9.3 Recommended work
Every 80 operating hours
Every 40 operating hours
Once after 20 operating hours / Every 20 operating hours
Once after 10 operating hours
every 12 months
Change the front brake fluid. ●
Change the rear brake fluid. ●
Change the hydraulic clutch fluid. ( p. 63) ●
Grease the steering head bearing. ( p. 47) ●
Service the fork. ○
Perform the shock absorber service. ○
Check/adjust the carburetor components. ● ● ●
Perform minor engine service. Check the cylinder and piston. Check the inlet membrane.
Check the exhaust control for functioning and smooth operation.)
● ● ●
Perform major engine service including removing and installing engine. (Change the
spring of the exhaust control. Change the piston. Change the connecting rod, conrod
bearing, and crank pin. Change the crankshaft bearing. Check the transmission and shift
mechanism. Change all engine bearings.)
●
○ One-time interval
● Periodic interval
To Next Page
Loading...
Need help?
General
