KTM 65 SX 2020 User Manual

SERVICE WORK ON THE CHASSIS 11
41
V00201-10
–
Remove screws
3
on the right fork leg. Take off the fork pro-
tector.
11.6 Installing the fork protector
V00201-11
– Position fork protector on the right fork leg. Mount and tighten
screws
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
V00200-11
– Position fork protector on left fork leg. Mount and tighten
screws
2
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
– Position the brake line and the clamp. Mount and tighten
screws
3
.
Guideline
Screw, brake line
bracket
EJOT 1.7 Nm
(1.25 lbf ft)
11.7 Removing the fork legs
Preparatory work
– Raise the motorcycle with a lift stand. ( p. 39)
– Remove the front wheel. ( p. 78)
V00227-10
Main work
–
Remove screws
1
and take off the clamp.
–
Remove screws
2
and take off the brake caliper.
– Allow the brake caliper and brake line to hang loosely to the
side.
Info
Do not kink the brake line.

KTM 65 SX 2020 Specifications

General

Brand	KTM
Model	65 SX 2020
Category	Motorcycle
Language	English