14 WHEELS, TIRES 116
L02181-12
(RC 125)
–
Remove screws
and push the fender to the side.
–
Remove screw
and pull wheel speed sensor
out of the hole.
–
Loosen screw
and screws
.
–
Unscrew screw
about 6 turns and press your hand on the screw to push the
wheel spindle out of the axle clamp. Remove screw
.
Warning
Danger of accidents Reduced braking effect caused by damaged brake discs.
– Always lay the wheel down in such a way that the brake discs are not dam-
aged.
– Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
fork.
Info
Do not pull the hand brake lever when the front wheel is removed.
14.2 Installing the front wheel
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
– Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
To Next Page
Loading...
Need help?
General
