CARE OF SAFETY LABELS
• Keep safety labels clean and free from obstructing
material.
• Clean safety labels with soap and water, dry with a
soft cloth.
• Replace damaged or missing safety labels with new
labels from your local KUBOTA Dealer.
• If a component with safety label(s) affixed is
replaced with new part, make sure new label(s) is
(are) attached in the same location(s) as the
replaced component.
• Mount new safety labels by applying on a clean dry
surface and pressing any bubbles to outside edge.
B2401DT, B2401DTWO, B2401DTN
To Next Page
Loading...
Need help?
General
