4. Lock the loader control lever in the “LOCK” position.
[B2401DT only]
(1) Loader control lever
(2) Lock lever
(A) Unlock
(B) Lock
5.
Place the position control lever in “LOWEST”
position.
(1) Position control lever (A) Down
6. Set the throttle lever to about 1/2 way.
(1) Hand throttle lever
(A) Increase
(B) Decrease
7. Insert the key into the key switch and turn it “ON”.
(1) Key switch
(A) Off
(B) On
(C) Preheat
(D) Start
Check Easy Checker lamps
• When the key is turned “ON”, lamps (3) (4)
should come on. If trouble should occur at any
location while the engine is running, the warning
lamp corresponding to that location comes on.
(1) Easy Checker
(2) Key switch
(3) Engine oil pressure
(4) Electrical charge
(5) Glow plug indicator
IMPORTANT :
• Daily checks with the Easy Checker only are
not sufficient. Never fail to conduct physical
daily checks carefully by referring to “DAILY
CHECK” section.
(See DAILY CHECK on page 25)
STARTING THE ENGINE OPERATING THE ENGINE
B2401DT, B2401DTWO, B2401DTN
To Next Page
Loading...
Need help?
General
