Kubota BX-80 User Manual

■ Checking Coolant Level
IMPORTANT:
• If the radiator cap has to be removed, follow the
caution above and securely retighten the cap.
• Use clean, fresh water and anti-freeze to fill the
recovery tank.
• If water should leak, consult your local KUBOTA
Dealer.
A CAUTION
To avoid personal injury:
• Be sure to stop the engine and remove the key
before checking coolant level.
• Do not remove the radiator cap while coolant is
hot. When cool, slowly rotate cap to the first
stop and allow sufficient time for excess
pressure to escape before removing cap
completely.
1. Check to see that the coolant level is between the "H"
and "L" marks of recovery tank.
2. When the coolant level drops due to evaporation, add
water only. In case of leakage, add antifreeze and
water in the specified mixing ratio up to the "H" level.
(See "Flush Cooling System and Changing Coolant" in
every 2 years maintenance)
(1) Radiator cap
(A) "H"
(BJ "L"
IMPORTANT:
• If the radiator cap has to be removed, follow the
caution above «d securely retighten the cap.
• Use clean, fresh water and anti-freeze to fill the
radiator.
• If water should leak, consult your local KUBOTA
Dealer.
PERIODIC SERVICE 39
■ Cleaning Panel and Radiator Screen
A CAUTION
To avoid personal injury:
• Be sure to stop the engine and remove the key
before removing the screen.
1. Check panel screen to be sure they are clean from
debris.
2. Detach the radiator screen, and then remove all the
foreign material.
NOTE:
• If the dust or chaff is accumulated in the battery
compartment, open the panel and clean completely.
(1) Panel
(2) Knob
(3) Center pilfer
(1) Radiator screen
(A) "DETACH"
o(L.
(A) "DETACH"
IMPORTANT: . ~ .
• Panel and radiator screen must be clean from debr.11,
to prevent engine from overheating and to allow good
air intake for air cleaner.
• Be sure to reinstall the panel on the piller completely
to prevent the invasion of dust.

Kubota BX-80 Specifications

General

Brand	Kubota
Model	BX-80
Category	Tractor
Language	English