Kubota BX-80 User Manual

♦ Test 2: Switch for the PTO clutch lever
1. Shift the range gear shift lever to "NEUTRAL" position.
2. Shift the PTO clutch lever to "ON" position.
3. Turn the key to "START' position.
4. The engine must not crank.
5. If it cranks, consult your local KUBOTA Dealer for this
service.
(1) Range gear shift lever (Hi-Lo)
(2) PTO clutch control lever
♦ Test 3: Switches for the operator's seaf and the
range gear shift lever
1. Sit on the operator's seat.
2. Start the engine.
3. Shift the range gear shift lever to "HIGH" or "LOW'
position.
4. Stand up. (Do not get off the machine.)
5. The engine must shut off after approximately 1
second.
6. If it does not stop, consult your local KUBOTA
Dealer for this service.
♦ Test 4: Switches for the operator's seat and the
PTO clutch lever
1. Sit on the operator's seat.
2. Start the engine.
3. Engage the PTO clutch lever.
4. Stand up. (Do not get off the machine.)
5. The engine must shut off after approximately 1
second.
6. If it does not stop, consult your local KUBOTA
Dealer for this service.
PERIODIC SERVICE 41
■ Lubricating Grease Fittings
Apply a small amount of multipurpose grease to the
following points every 50 hours.
-=----------
F-11496C
(1) Battery terminals
(1) Grease fitting (Speed control pedal)
:/JfJ;t;~--
~-~~\~~j~~f

Kubota BX-80 Specifications

General

Brand	Kubota
Model	BX-80
Category	Tractor
Language	English