44 PERIODIC SERVICE
■
Changing
Engine Oil
A CAUTION
To avoid personal injury:
• Be sure to stop the engine and remove the key
before changing the oil.
• Allow engine to cool down sufficiently, oil can
be hot and can burn.
1. To drain the used oil, remove the drain plug at the
bottom of the engine and drain the oil completely into
the oil pan.
All the used oil can be drained out easily when the
engine is still warm.
2. After draining reinstall the drain plug.
3. Fill with the new oil up to the upper notch on the
dipstick.
(See "LUBRICANTS
11
in Maintenance section)
4. Properly dispose of used oil.
Oil
capacity
with filter
(1) Oil inlet
(2) Dipstick
BX1500
1.9 L (2.0 U.S.qts.)
BX1800
BX2200
2.5 L (2.6 U.S.qts.)
(A) Oil level is acceptable within this range
BX1800·2200
(1) Drain plug
r1
I
I
i
To Next Page
Loading...
Need help?
General
