35OPERATING THE TRACTOR
BSpeed Control Pedal
To avoid personal injury:
A Do not operate if tractor moves on level ground
with foot off Speed Control Pedal.
Forward Pedal
Depress the forward pedal with the toe of your right foot to
move forward.
Reverse Pedal
Depress the reverse pedal with the heel of your right foot
to move backward.
A To prevent serious damage to the HST, do not adjust
the stopper bolts.
A When you stand up from the seat with the speed
control pedal stepped on, the engine will stop
regardless of whether the machine is moving or not.
This is because the tractor is equipped with Operator
Presence Control system (OPC).
BSpeed Set Device
The Speed Set Device is designed for tractor operating
efficiency and operator's comfort. This device will provide
a constant forward operating speed by mechanically
holding the speed control pedal at a selected position.
C To engage Speed Set Device
1. Accelerate speed to desired level using Speed Control
Pedal.
2. Push and hold the speed set rod downward to "ON"
position.
3. Release Speed Control Pedal.
4. Release the speed set rod and desired speed will be
maintained.
C To disengage Speed Set Device
A Depress the brake pedal.
A If you step on the pedal on the forward acceleration
side, the speed set device will disengage.
A Speed set device will not operate in reverse.
A To prevent the damage of speed set device, do not
depress the reverse pedal when the speed set device
is engaged.
9. Depress the Speed Control Pedal.
(1) Speed control pedal
(2) Stopper bolts
(A) "FORWARD"
(B) "REVERSE"
To Next Page
Loading...
Need help?
General
