OPERATING THE LOADER68
ASSEMBLE PALLET FORK
[Option for LA240A, LA240A AU-SG]
1. Install the fork to the middle of the frame.
(fit the lower hook of the fork to the center notch of the
frame)
2. Slide the fork to the desired position.
3. Push the lock lever and slide the fork slightly until the
lock pin engages with one of the notches to lock the
folk.
4. The other fork can be installed using the same
procedures.
(1) Fork
(1) Fork
(1) Lock lever
To Next Page
Loading...
Need help?
General
