67OPERATING THE LOADER
DETACHING ATTACHMENTS
[Option for LA240A, LA240A AU-SG]
1. Detaching the attachments is done in the reverse of
attaching attachments.
2. Lower the implement and roll it back completely. Stop
the engine and set the parking brake.
3. Remove Hitch Pins and Snapper Pins.
4. While sitting in the tractor operator's seat, start the
engine and slowly move the loader control lever to the
"dump" position. The attachment will be pushed away
slightly from the Quick Coupler.
5. Lower the loader boom so the receivers of the Quick
Coupler clear the bottom of the Upper Pins.
6. Back away from the attachment slowly.
7. Reinstall Hitch Pins and Snapper Pins in the BX6315
or LA243A AU-SG Quick Coupler, even if no
attachment is used.
DISMOUNTING THE LOADER
[Option for LA240A, LA240A AU-SG]
To avoid machine damage or personal injury:
A Remove loader from tractor only when an
approved loader bucket is attached.
Follow instructions provided in "REMOVING THE
LOADER" section in this operator's manual.
ATTACHMENTS
[Option for LA240A, LA240A AU-SG]
BBucket
Rigid type square 48" bucket can be used as quick
buckets for BX6315 or LA243A AU-SG quick coupler.
BPallet fork
(1) Rigid type square 48" bucket
LOADER MODEL RATED CAPACITY
LA240A, LA240A AU-SG 310 LBS.
To Next Page
Loading...
Need help?
General
