Kubota RTV400 User Manual

PERIODIC SERVICE48
BCleaning Engine Air Cleaner Element
1. Remove the air cleaner cover.
2. Blow compressed air to the end of the element and
inside the air cleaner with care not to allow dust into
the intake air inlet.
3. Remove the air cleaner element.
4. Clean the element:
(1) When dry dust adheres to the element, blow
compressed air from the inside, turning the
element. Pressure of compressed air must be
under 205 kPa (2.1 kgf/cm , 30 psi).
(2) When carbon or oil adheres to the element,
replace the element with new one even if it has
not been used for 1 year.
5. Replace the element:
Once yearly or after every sixth cleaning, whichever
comes first.
A The air cleaner uses a dry element, never apply oil.
A Do not run the engine with filter element removed.
A When removing and installing the element, be careful
not to allow dust into the intake air inlet.
BCleaning CVT Air Cleaner Element
1. Remove the air cleaner cover and element.
2. Clean the element:
(1) When dry dust adheres to the element, blow
compressed air from the inside, turning the
element. Pressure of compressed air must be
under 205 kPa (2.1 kgf/cm , 30 psi).
(2) When carbon or oil adheres to the element,
replace the element with new one even if it has
not been used for 1 year.
3. Replace the element:
Once yearly or after every sixth cleaning, whichever
comes first.
A The air cleaner uses a dry element, never apply oil.
A Do not run the engine with filter element removed.
(1) Cover
(2) Clamp
(3) Element
(A) Intake air inlet
(B) Element end
(C) Air cleaner inside
(1) Cover
(2) Clamp
(3) Element

Kubota RTV400 Specifications

General

Brand	Kubota
Model	RTV400
Category	Utility Vehicle
Language	English