Kubota u25 User Manual

5INSTRUMENT PANEL AND CONTROL ELEMENTS
B Instrument Panel
DEPICTED CONTENTS
(1) Speed indicator light
(2) Aux operation lamp
(3) Periodic check lamp
(4) Clock setting request lamp
(5) Glow lamp
(6) Remaining fuel warning lamp
(7) Engine oil pressure warning lamp
(8) Battery charge lamp
(9) Coolant temperature warning lamp
(10) Warning lamp
(11) Fuel gauge
(12) Coolant temperature gauge
(13) LCD display

Kubota u25 Specifications

General

Engine Power	14.9 kW (20 hp)
Max Dig Depth	2, 620 mm
Max Reach	4, 740 mm
Max Reach at Ground Level	4, 690 mm
Transport Length	3, 990 mm
Transport Width	1, 490 mm
Transport Height	2, 490 mm

Summary

ABBREVIATION LIST

GENERAL SYMBOLS

FOREWORD

SAFETY FIRST GUIDELINES

Defines DANGER, WARNING, CAUTION, IMPORTANT, and NOTE symbols for safety.

SAFE OPERATION

BEFORE OPERATION CHECKS

Ensures the excavator is ready and safe before starting.

STARTING THE EXCAVATOR

Step-by-step guide for safely starting the excavator engine.

SAFETY FOR CHILDREN

Precautions to protect children from hazards around the excavator.

AFTER OPERATION PROCEDURES

Steps to secure the machine after use.

SAFE LOADING AND TRANSPORT

Guidelines for safely loading and transporting the excavator.

DANGER, WARNING, AND CAUTION LABELS

Identification and explanation of various safety labels on the machine.

CARE OF SAFETY LABELS

Instructions for maintaining and replacing safety labels.

DEALER SERVICE

TECHNICAL DATA

DESCRIPTION OF MACHINE PARTS

INSTRUMENT PANEL AND CONTROL ELEMENTS

INSTRUMENT PANEL AND SWITCHES

Identifies switches and indicators on the main panel.

INSTRUMENT PANEL INDICATORS

Details warning lamps, gauges, and LCD display elements.

CONTROL PEDALS AND LEVERS

Explains the function of various control pedals and levers.

CHECKS BEFORE START

DAILY CHECKS

Essential checks performed before each operation for safety and machine health.

SEAT ADJUSTMENT AND LOCKING

Covers sliding the seat and locking controls for safety.

OPENING AND CLOSING PARTS

Procedures for opening the engine hood and fuel tank cover.

TOOL STORAGE AND SAFETY DEVICE HANDLING

Locating tools and handling control lever locks.

ROPS/OPG SAFETY FEATURES

Information on Roll-Over Protective Structures and Operator Protective Guards.

OPERATION OF THE ENGINE

STARTING THE ENGINE

Step-by-step guide to start the engine safely.

ENGINE OPERATION INDICATORS

Explains gauges, lamps, and LCD displays during engine operation.

ENGINE STARTING AND STOPPING PROCEDURES

Covers cold weather starting, stopping, and auxiliary battery use.

EXCAVATOR OPERATION

RUNNING-IN THE NEW EXCAVATOR

Guidance for the initial 50 working hours for longevity.

STARTING AND BASIC CONTROLS

Procedures for starting, adjusting seat, lock levers, lights, and buzzer.

OPERATIONAL PROCEDURES

Detailed steps for using boom, arm, bucket, swing, dozer, driving, and turning.

TRANSPORTING THE EXCAVATOR ON A TRUCK

LIFTING OF THE EXCAVATOR

MAINTENANCE

MAINTENANCE INTERVALS

Overview of maintenance tasks and their recommended intervals.

DAILY CHECKS

Essential checks performed before each operation for safety and machine health.

PERIODIC MAINTENANCE (BY SERVICE HOURS)

Detailed maintenance procedures based on operating hours (50, 200, 500, etc.).

OTHER ADJUSTMENTS AND REPLACEMENTS

PURGING OF THE FUEL SYSTEM

Procedure to remove air from the fuel system after filter changes.

ADJUSTMENT OF TRACKS

How to adjust track tension for rubber and steel tracks.

CHANGING THE BUCKET

FUSES

REPLACING FUSES

Steps for replacing blown fuses in the fuse box.

SLOW BLOW FUSE

Information on slow blow fuses for circuit protection.

TROUBLESHOOTING

COMMON TROUBLESHOOTING

Table of common engine, hydraulic, and drive system problems and solutions.

KUBOTA I.C.S. NAVIGATION LIST OF ERROR CODE

Explains error codes displayed on the LCD for system diagnostics.

OPERATION UNDER COLD WEATHER CONDITIONS

PREPARATION FOR OPERATION IN COLD WEATHER

Steps for preparing the machine for cold temperatures.

PROCEDURE AFTER DONE WORK

Post-operation procedures to prevent cold weather damage.

LONG STORAGE

PROCEDURES FOR STORING THE EXCAVATOR

Guidelines for storing the machine for extended durations.

PROCEDURES FOR OPERATION AFTER LONG STORAGE

Steps to prepare the machine for use after storage.

PERIODIC REPLACEMENT OF IMPORTANT COMPONENT PARTS

RECOMMENDED OILS

MAIN DIMENSIONS

LIFTING CAPACITY