CHECKS BEFORE START8
BDisplay Selector Switch
Press the display selector switch while the engine is
running. The LCD meter display will change from one
indication mode to the other.
Change the two-mode display according to your jobs.
C AUX port in use
A Even with the starter key not yet inserted, press the
electronic meter's user setting switch or the display
selector switch, and the LCD shows the hour meter,
fuel gauge, water temperature gauge and clock for 10
seconds.
BLCD for Normal Operation
C Fuel gauge
To avoid personal injury or death:
A Before adding fuel, be sure to stop the engine.
A Be sure to keep open flame away from the
machine. Otherwise a fire may result.
With the starter key at the "RUN" position, the fuel
remaining in the fuel tank is indicated in the block.
If the fuel runs short, open the cap and refuel the tank.
A If the fuel gauge indicator is near the "E" or the "Feed
fuel" message appears, add fuel as soon as possible.
If the indicator is near "E" and the machine is operated
on a slope, the engine may run out of fuel.
A To open the fuel cap, keep the key inserted.
(1) Display selector switch
(1) Display selector switch
(1) Fuel gauge (A) "E"
(1) Fuel cap
To Next Page
Loading...
Need help?
General
