Drive chain cleaning and lubrication
The drive chain is equipped with rubber O-rings
between the chain plates. Steam cleaning, high-
pressure washes, and certain solvents can
damage these O-rings. Use only kerosene to
clean the drive chain. Wipe it dry, and
thoroughly lubricate it with SAE 30~50 motor oil.
Do not use any other lubricants on the drive
chain. They may contain solvents that could
damage the O-rings.
Rear swing arm lubrication
Lubricate the pivot points using a grease gun.
(1) O-rings
124
To Next Page
Loading...
Need help?
General
