Make sure there is no brake fluid leakage.
Check operation of the levers. They should
move smoothly and there should be a firm
feeling when the brake is applied. If not, have
the machine inspected by a KYMCO dealer.
Brake operation
Test the brakes at slow speed after starting
out to make sure they are working properly. If
the brakes do not provide proper braking
performance, inspect the brakes for wear.
(See page 115~119.)
Front and rear brakes
35
1.
2.
3.
(1) Locknuts (4) Drive select lever
(2) Rod (N) Neutral
(3) Standard/phillips screwdriver
(1)
(2)
(3)
(N)
(4)
To Next Page
Loading...
Need help?
General
