KYMCO MXU 700i T3B ABS User Manual

4-30
4.16. SEAT
4.16.1. OPEN
To remove the seat, pull the seat lock lever upward and pull up
the seat at the rear.
(1) Seat lock lever
4.16.2. INSTALL
To install the seat, align the tabs on the seat with the grommets
on the frame and press the seat down until it locks.
4.16.3. PASSENGER SEAT*
*EPS MODELS ONLY
To remove the seat, pull the passenger seat lock lever upward
and pull up the seat.
NOTE
Make sure the passenger seat is secure before mounting the
ATV.
Severe personal injury may result if the passenger seat is not
properly secured.

KYMCO MXU 700i T3B ABS Specifications

General

Brand	KYMCO
Model	MXU 700i T3B ABS
Category	Offroad Vehicle
Language	English