5-2
POTENTIAL HAZARD
Failure to inspect the ATV before operating. Failure to properly
maintain the ATV.
WHAT CAN HAPPEN
Increases the possibility of an accident or equipment damage.
HOW TO AVOID THE HAZARD
Always inspect your ATV each time you use it to make sure the
ATV is in safe operating condition.
Always follow the inspection and maintenance procedures and
schedules described in the Owner's Manual.
5.1. DRIVE SELECT LEVER
Before shifting, you must stop the machine and return the
throttle lever to its closed position until the engine speed to the
specified idling speed. Otherwise, the transmission may be
damaged.
Check operation of the lever before start the engine.
1. Make sure moving the shift lever into the "N" position of
the shift guide.
2. Turn the ignition switch to "ON" and check the neutral
indicator lamp comes on.
3. If the neutral indicator lamp does not come on, then see
CH 5.1.1 for adjustment.
To Next Page
Loading...
Need help?
General
