5-6
5.2. FRONT AND REAR BRAKES
1. Make sure there is no brake fluid leakage.
2. Check operation of the levers and pedal. They should
move smoothly and there should be a firm feeling when
the brake is applied. If not, have the machine inspected
by a KYMCO dealer.
3. Brake operation Test the brakes at slow speed after
starting out to make sure they are working properly. If the
brakes do not provide proper braking performance,
inspect the brakes for wear.
POTENTIAL HAZARD
Riding with improperly operating brakes.
WHAT CAN HAPPEN
You could lose braking ability, which could lead to an accident.
HOW TO AVOID THE HAZARD
Always check the brakes at the start of every ride. Do not ride
the ATV if you find any problem with the brakes. If a problem
cannot be corrected by the adjustment procedures provided in
this manual, have the ATV inspected by a KYMCO dealer.
To Next Page
Loading...
Need help?
General
