KYMCO PEOPLE 150 User Manual

7. CYLINDER HEAD/VALVES
7-8
PEOPL E 12 5/150
Remove the two cylinder head bolts.
Remove the cylinder head.
Remove the dowel pins and cylinder head
gasket.
Remove the cam chain guide.
Remove all gasket remnants from the cylinder
surface.
CYLINDER HEAD DISASSEMBLY
Remove the valve spring cotters, retainers,
springs, spring seats and valve stem seals
using a valve spring compressor.
Valve Spring Compressor
Valve Spring Compressor Attachment
Valve Spring Compressor
Cylinder Head
• Be sure to compress the valve
springs with a valve spring compressor.
• Mark all disassembled parts to
ensure correct reassemble.
＊
Dowel Pins
• Avoid damaging the cylinder contact
surface.
• Be careful not to drop any gasket
remnants into the engine.
＊
Cam Chain Guide
Cylinder Head Gasket
Special
Bolts
Valve Spring Compressor Attachment
www.PlanDeGraissage.org

KYMCO PEOPLE 150 Specifications

General

Ignition	CDI
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Fuel Capacity	7.5 Liters
Wheelbase	1380 mm
Cooling System	Air Cooled
Starter	Electric
Transmission	CVT