－10－
(2) ELECTRIC STARTER BUTTON
To start the engine, first turn on the ignition switch
(" ")and then push the electric starter button. At
this time, be sure to fully apply the front or rear brake
lever (pedal) in order to connect the power.
During engine running, do not push the starter
button to avoid engine damage.
Turn the headlight switch and turn signal switch off
before using the starter button.
Release the starter button immediately after
the engine is started.
electric
off
electric
electric
(3) HEADLIGHT SWITCH
At this position, the position light, headlight,
instrument lights and taillight turn off together.
At this position, the position light, instrument lights
and taillight light turn on.
At this position, the position light, headlight,
instrument lights and taillight light all turn on.
CAUTION:
ENGINE
STOP
ENGINE
STOP
ENGINE
STOP
To Next Page
Loading...
Need help?
General