(4) FUSE CHANGE
Remove met-in box and fuse cover.
Turn off the main switch and check if the fuse is burned
out.
When the fuse is burned out, replace with a specified
fuse.
Check for the cause of breakdown before replacing.
10A(red)
15A(blue)
30A(green)
Prepared Fuse: Fuse Cover
Be careful not to excessively expand the fuse clip
during removal.
After a new fuse is installed, check the fuse clip for
looseness which is the main cause of trouble.
Never use fuse of unspecified capacity, it may cause
wire overheating and burning out.
When replacing electric appliances (lights,
instruments),be sure to use the recommended genuine
parts.
When washing the scooter, avoid flushing it.
If the cause can not be found, contact our distributor or
service station for inspection.
CAUTION:
－43－
Replacement
To Next Page
Loading...
Need help?
General