4. PRE-RIDE INSPECTION
(1) ADVANCE INSPECTION
Get into a good habit of inspection before riding. For the
sake of safety and to prevent vehicle damage and traffic
accidents, the pre-ride inspection is absolutely required.
Be sure to perform inspection and maintenance for your
new scooter after it is
ridden for 300km.
(2) ENGINE OIL LEVEL INSPECTION/REFILLING
Place the scooter on its main stand. Take out the oil
dipstick and wipe it clean.
Directly insert the oil dipstick into the engine oil.
(Don't screw it in.)
Take out the oil dipstick and check the oil level. If it is
close to the lower limit, add engine oil to the upper limit.
The temperature of engine and exhaust muffler is very
high. When checking the oil level, be careful to avoid
scalding.
Riding with insufficient engin oil will cause breakdown
easily.
CAUTION:
CAUTION:
－21－
To Next Page
Loading...
Need help?
General