45
MAINTENANCE
Maintenance schedule (Xciting 500i & 500Ri models)
Perform the pre-ride inspection (see page 34) at each scheduled maintenance period. This interval should be judged by
odometer reading or months, whichever comes first.
Maintenance schedule legend (see page 46 and 47):
I: INSPECT AND CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSAR Y
C: CLEAN R: REPLACE A: ADJUST L: LUBRICATE
The maintenance schedule on the flowing two pages specifies the maintenance required to keep your Xciting 500i or 500Ri
scooter in peak operating condition. Maintenance work should be performed in accordance with KYMCO standards and
specifications by properly trained and equipped technicians. Your KYMCO dealer meets all of these requirements.
* Should be serviced by your KYMCO dealer, unless you have the proper tools, service data and are technically qualified.
* * In the interest of safety, we recommend these items be serviced only by your KYMCO dealer . KYMCO USA recommends
that your KYMCO dealer road test your scooter after each periodic maintenance service is completed.
Maintenance schedule notes (see page 46 and 47):
1. At higher odometer readings, repeat at the frequency interval established here.
2. Service more frequently if the scooter is ridden in unusually wet or dusty areas.
3. Service more frequently when riding in rain or at full throttle.
4. Inspect every 12,000 mi (18,000 km) after replacement.
5. Replace every 1 year, or every 6,000 mi (1,000 km), whichever comes first. Replacement requires mechanical skill.
6. Replace every 2 years, or at the indicated odometer interval, whichever comes first. Replacement requires mechanical skill.
7. Replace every 2 years. Replacement requires mechanical skill.
To Next Page
Loading...
Need help?
General