52
Engine oil
Engine oil recommendation
Use a premium quality 4-stroke engine oil to ensure longer
service life of your scooter. Only use oils that have a SJ rating
per the API service classification.
Engine oil viscosity - Xciting 500i or 500Ri: SAE 5W-50
Engine oil viscosity - Xciting 300i or 300Ri: SAE 15W-40
Engine oil viscosity - Xciting 250i or 250Ri: SAE 15W-40
If these viscosities are not available, select an alternative
engine oil according to the chart shown below.
ENGINE OIL VISCOSITIES
Engine oil capacity - Xciting 500i or 500Ri: 2.1 qt (2.0 L)
Engine oil capacity - Xciting 300i or 300Ri: 0.95 qt (0.9 L)
Engine oil capacity - Xciting 250i or 250Ri: 0.95 qt (0.9 L)
Engine oil level inspection
Check the engine oil level each day before riding your scooter.
The level must be maintained between the upper 1 and lower
level 2 marks on the oil filler cap/dipstick 3.
1. Start the engine and let it idle for a few minutes. Make sure
the red low oil pressure indicator goes of f. If the light re-
mains on, stop the engine immediately.
11
11
1
22
22
2
33
33
3
Running the engine with insufficient oil pressure can
cause serious engine damage.
2. Stop the engine and put the scooter on its center stand on
level ground.
MAINTENANCE
To Next Page
Need help?
General
