84
SECTION 5 -
ABS MODEL SUPPLEMENT
Multifunction meter (for Xciting models equipped with ABS)
The ABS indicator light 1 is located on the right side of the multifunction meter. This indicator light will self-check itself and the
ABS system by illuminating when the ignition switch is turned on, and it turns of f shortly after the vehicle starts moving.
If an ABS fault is detected by the system's micro processor , the ABS indicator will illuminate and stay on until the fault is
repaired.
If the indicator light is lit and remains on after the scooter is moving, it also indicates that the ABS system is not function ing.
Even if there is a ABS system failure, the conventional braking system will still function normally .
NOTE: If the ABS indicator lamp indicates a fault, take your scooter to your authorized KYMCO dealer for repairs. Do
not attempt to effect repairs yourself.
11
11
1
To Next Page
Need help?
General
