KYMCO Yager 200i User Manual

22
CONTROLS & FEATURES
To open the seat on your Yager 200i (insert the ignition switch
key to active the seat release in the ignition switch):
Seat
1. With the ignition switch at the “ “ position (the engine is
running), push the key in and turn it counterclockwise to the
“SEAT OPEN” position.
2. With the ignition switch at the “ “ position (the engine not
running), push the key in and turn it counterclockwise to the
“SEAT OPEN” position.
3. Lift up on the back of the seat to access the underseat
storage compartment.
11
11
1
22
22
2
33
33
3
To close and lock the seat on your Yager 200i:
Lower the seat and press down until it is secured by the
latch. Gently lift up on the seat to make sure it is locked
before riding.
NOTE: The “MET-IN” indicator lamp on the dash will illu-
minate if the seat is open or unlocked.

KYMCO Yager 200i Specifications

General

Brand	KYMCO
Model	Yager 200i
Category	Scooter
Language	English