31
Pre-ride inspection
For your safety, it is very important to take a few moments
before each ride to walk around your scooter and check its
condition. If you detect any problem, be sure to address it im-
mediately, or have it corrected by your KYMCO dealer.
Improperly maintaining your scooter or failing to cor-
rect a problem before riding can cause a crash in which
you can be seriously hurt or killed.
Always perform a pre-ride inspection before every ride
and correct any problems.
Performing pre-ride inspections does not take the place
of regular maintenance. Follow the maintenance sched-
ule recommendations on pages 39 -41 of this manual.
After one month of use or 600 miles (1,000 km) of riding,
which ever occurs first, contact your KYMCO dealer to
have an initial service of your scooter performed.
This initial service is the most important service in the
life of your scooter and includes checks and adjust-
ments that will help ensure that your scooter operates
efficiently and safely.
OPERATION
1. Engine oil level: Add engine oil if required (page 43). Check
for leaks.
2. Fuel level: Fill fuel tank when necessary (page 20). Check
for leaks.
3. Coolant level: Add coolant if required (pages 53).
4. Front and rear brakes: Check operation and make sure
there is no brake fluid leakage (pages 56 and 57).
5. Tires: Check condition and inflation (pages 60 - 62).
6. Throttle: Check for smooth operation and that it closes
fully in all steering positions (page 51).
7. Lights and horn: Check that headlight, tail/brake light, turn
signals, indicators and horn function properly (page 18).
8. Engine stop switch: Check for proper function (page 18).
9. Side stand safety interlock system: Check for proper func-
tion (page55).
10. Chassis: Check for overall proper function (page 62).
To Next Page
Loading...
Need help?
General
