51
MAINTENANCE
3 Remove the six filter retaining screws 7, then remove and
discard the air cleaner element 8.
4. Install a new air cleaner element. Use the KYMCO genuine
air cleaner element or an equivalent air cleaner element speci-
fied for your scooter.
5. Complete the installation by reinstalling the air cleaner parts
in the reverse order of removal.
88
88
8
77
77
7
77
77
7
77
77
7
77
77
7
77
77
7
77
77
7
Improper installation for the filter can cause water or
dirt to enter the engine causing premature wear.
Using the wrong KYMCO air cleaner element or a non-
KYMCO air cleaner element which is not of equivalent
quality may cause premature engine wear or perfor-
mance problems.
Throttle operation & adjustment
The throttle operation and free play must be inspected and
adjusted periodically (as part of the pre-ride inspection).
1 Check that the throttle grip rotates smoothly from the fully
open to the fully closed position. Check the operation and all
steering angles.
2. Measure the throttle grip free play at the throttle grip flange.
Throttle free play: 0.08 - 0.24 in (2 - 6 mm)
Checking throttle operation and free play:
To Next Page
Loading...
Need help?
General
