39
MAINTENANCE
Maintenance schedule
Perform the pre-ride inspection (see page 31) at each scheduled maintenance period. This interval should be judged by
odometer reading or months, whichever comes first.
Maintenance schedule legend (see pages 40 and 41):
I: INSPECT
AND CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY
C: CLEAN R: REPLACE A: ADJUST L: LUBRICATE T: TIGHTEN
The maintenance schedule on pages 40 an 41 specifies the maintenance required to keep your Yager 200i scooter in peak
operating condition. Maintenance work should be performed in accordance with KYMCO standards and specifications by
properly trained and equipped technicians. Your KYMCO dealer meets all of these requirements.
* Should be serviced by your KYMCO dealer, unless you have the proper tools, service data and are technically qualified.
* * In the interest of safety, we recommend these items be serviced only by your KYMCO dealer. KYMCO USA recommends
that your KYMCO dealer road test your scooter after each periodic maintenance service is completed.
Maintenance schedule notes (see pages 40 and 41):
1. At higher odometer readings, repeat at the frequency interval listed here.
2. Service more frequently if the scooter is ridden in unusually wet or dusty areas.
3. Service more frequently when riding in rain or at full throttle.
4. Clean every 1200 miles (2000 km) after replacement and replace every 3000 miles (5000 km).
5. Replace every 1 year, or every 2400 miles (4000 km), whichever comes first. Replacment requires mechanical skill.
6. Replace every 6000 miles (10000 km). Replacment requires mechanical skill.
7. Replace every 2 years. Replacment requires mechanical skill.
8. Replace every 3700 miles (6000 km). Replacment requires mechanical skill.
To Next Page
Loading...
Need help?
General
