33
OPERATION
3. Apply the rear brake 1 (left lever). The electric starter will
only work when the brake lever is squeezed and the side
stand is up.
4. Press the starter button 2 without rotating the throttle grip.
Release the starter button as soon as the engine starts.
11
11
1
22
22
2
5. Keep the throttle 3 closed as the engine warms up.
6. Allow a cold engine to warm 2 - 3 minutes before riding.
Do not “BLIP” the throttle (opening and closing it
rapidly) as the scooter can lunge forward suddenly.
Do not leave your scooter unattended while the en-
gine is warming up.
33
33
3
NOTE: If the scooter’s engine is warm and does not start
immediately, rotate the throttle grip 1/8 to 1/4 open to help
the engine start.
To Next Page
Loading...
Need help?
General
