To Next Page

To Previous Page

5. ENGINE REMOVAL/INSTALLATION

ZX / SCOUT

Inspect the stopper rubbers and bushings for

damage and replace with new ones if

necessary.

ENGINE INSTALLATION

Install the engine in the reverse order of

removal.

Torque Values:

Engine mounting bolt : 4.5 5.5kg-m

Rear shock absorber lower mount bolt:

2.4 3.0kg-m

Perform the following inspections and

adjustments after installation.

• Throttle cable

• Oil pump control cable (

3-10)

• Rear brake cable (

3-4)

• Oil pump bleeding (

4-5)

Cables and wires should be routed

properly.

Bushings

Engine Hanger

Stopper Rubbers

KYMCO ZX User Manual

Questions and Answers: