AUTO BYSTARTER
AUTO BYSTARTER INSPECTION
Measure the resistance between the auto
bystarter wire terminals.
Resistance: 5Ω (10 minutes minimum after
stopping the engine)
If the resistance exceeds 5Ω, replace the auto
bystarter with a new one.
After the engine stops for 30 minutes, connect
a hose to the fuel enriching circuit and blow the
hose with mouth.
If air cannot be blown into the hose (clogged),
the auto bystarter is faulty. Replace it with a
new one.
Connect the auto bystarter yellow wire to the
battery positive (+) terminal and green/ black wire
to the battery negative (-) terminal and wait 5
minutes.
Connect a hose to the fuel enriching circuit and
To Next Page
Loading...
Need help?
General
