3NC/3NB/3NK
2-1-3
2-1-2 Prosessing section
The processing section consists of the parts shown in figure below and discharges paper conveyed from the
bridge section to the eject tray. Also this section performs processing in the bundle discharge mode and the
staple mode.
Figure 2-1-3 Processing section
7659
11
10 8 1
2
3412
13,14
16
15
1. Middle roller
2. Middle pulley
3. DF entrance sensor(DFPES)
4. DF middle sensor (DFMS)
5. Actuator (DF middle sensor )
6. Middle eject roller
7. Middle eject pulley
8. Bundle discharge unit
9. Eject roller
10. Eject pulley
11. DF eject paper sensor (DFEPS)
12. Adjustment tray
13. DF Adjustment sensor 1 (DFSDS1)
14. DF Adjustment sensor 2 (DFSDS2)
15. Staple unit
16. DF slide sensor (DFSLS)
To Next Page
Loading...
Need help?
General
