3NC/3NB/3NK
2-1-5
(1) Bundle discharge operation
1. Paper is fed to the processing section
by rotation of the middle roller and the
middle eject roller. When the paper is
conveyed into the processing section,
the DF eject release motor is driven to
raise the bundle discharge unit.
2. When the trailing edge of paper passes
through the middle eject roller, the
paper conveying guide lowers and the
paper is fed to the adjustment tray by
paddle.
DF adjustment motors 1 and 2 activate
the adjustment guide to adjust the
paper.
3. When adjustment of the last sheet of
the bundle is completed, the eject roller
and the paddle rotate to discharge the
bundle of paper to the eject tray.
Figure 2-1-5
Middle roller
Middle eject roller
DF paddle motor
Paddle
Eject roller
DF adjustment motor 1,2
Bundle discharge unit
Adjustment tray
DF eject release motor
paper conveying guide
To Next Page
Loading...
Need help?
General
