Kyocera Ecosys FS-1320D Technical Reference Manual

Chapter 7
Emulation
The printing systems emulate the operation of seven other printers:
• HP LaserJet (mode 6)
• HP 7550A (mode 8)
• IBM Proprinter X24E (mode 1)
• Epson LQ-850 (mode 5)
• Diablo 630 (mode 2)
• Standard line printer (mode 0)
• KPDL (mode 9) [PostScript compatible]
Word-processing and graphics software for any of the above printers also works with the
printing system. All you need to do is to set the printing system to emulate the printer
your software supports and select the appropriate printer driver.
In rare cases when your software does not support any of the printers above, install your
software to drive the standard line printer and use PRESCRIBE commands to control
line spacing, character spacing, etc.
Inappropriate selection of printer drivers and printer-based emulations will produce
undesirable results.
When shipped from the factory, the printing system is set to emulate the HP LaserJet. For
best results, look for an appropriate printer driver in your software application.
You can also find the appropriate printer driver for your model in the CD-ROM supplied
with the product. Or, you are encouraged to visit our Internet home page to directly
download the printer driver of the latest version.
This chapter first explains how to select an emulation. Then it gives some general infor-
mation applying to all the emulation modes. Finally, it goes over each of the modes,
explaining the printing system’s word-processing capabilities and showing its character
sets. Tables of control codes and escape sequences are also given at the end of each emu-
lation section.

Kyocera Ecosys FS-1320D Specifications

General

Ethernet LAN	No
Network ready	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	35 ppm
Printing colors	Black
Maximum duty cycle	50000 pages per month
Number of print cartridges	1
Page description languages	IBM ProPrinter, PCL 5c, PCL 6, PostScript 3
Processor model	405F5
Processor family	PowerPC
Maximum internal memory	544 MB
Display	LED
Certification	TÜV/GS, CE, PTS, C-Tick
Total input capacity	250 sheets
Maximum input capacity	800 sheets
Maximum number of input trays	3
Multi-Purpose tray input capacity	50 sheets
Custom media width	70 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	148 - 356 mm
Duplex media weight	60 - 105 g/m²
Paper tray media types	Plain paper
Paper tray media weight	60 - 120 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Standard interfaces	USB 2.0
Optional connectivity	Ethernet
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	7.2 W
Power consumption (printing)	544 W
Power consumption (PowerSave)	4.3 W
Media thickness	0.11 mm
Compatible operating systems	Windows OS Linux OS Unix OS Mac OS X 10.2+

Weight and Dimensions

Dimensions (WxDxH)	375 x 393 x 250 mm