Kyocera Ecosys FS-1320D Technical Reference Manual

HP LaserJet Emulation (Mode 6)
7-37
LaserJet Font Escape Sequences
The example below shows an HP font selection escape sequence that selects a LetterGot-
hic font with fixed-pitch, 12-cpi, 12-point, upright-style, normal stroke weight.
To select this LetterGothic font, send the following escape sequence to the printing sys-
tem:
ESC(8U ESC(s0P ESC(s12H ESC(s12V ESC(s0S ESC(s0B ESC(s4102T
Any escape sequence with two similar consecutive letters after the ESC parameter can be
combined as in the transformation of the LetterGothic font below:
ESC(8U ESC(s0p12h12v0s0b4102T
The FSET command of PRESCRIBE utilizes a similar font selection method. (The sym-
bol set selection is made with the CSET command.) Note the similarities in the FSET
command sequence below:
FSET 0p12h12v0s0b4102T;
Several other LaserJet codes should be considered for font management. See the Font
Management section of the HP LaseJetPrinter commands on page 56 and onwards.
LaserJet Symbol Sets
Symbol set has the highest priority in the HP font selection. The factory default symbol
set is IBM PC-8 (10U) for the LaserJet emulation. The LaserJet printer has many other
symbol sets not directly accessed by the INTL command. Temporary selection of one of
these symbol sets can be made with the CSET (Change symbol SET) command or from
the operator panel keys. You can also assign one of these symbol sets to a particular font
using the FSET (change current Font SETting) command. More information on these
commands appear in Chapter 4.
By giving a particular value for the FRPO U6 and U7 parameters, you can set one of the
HP symbol sets as the power-up symbol set. In general, symbol set value is:
(Escape sequence value field value × 32 + (Decimal value of escape sequence termina-
tion character – 64) [=(U7 – 50) × 100 + U6])
Symbol Sets for Bitmap Fonts
The printing system substitutes with a scalable font when a bitmap font is required for
downward compatibility. The following symbol sets are supported when substituted bit-
map fonts are in use. To power up the printing system in one of these symbol set, use the
following FRPO U6 and U7 values.
Characteristic Value (example) Escape Sequence
Symbol set Roman-8 ESC(8U
Spacing Fixed ESC(s0P
Pitch 12-cpi ESC(s12H
Height 12-point ESC(s12V
Style Upright ESC(s0S
Stroke weight Normal ESC(s0B
Typeface Letter Gothic ESC(s4102T

Kyocera Ecosys FS-1320D Specifications

General

Ethernet LAN	No
Network ready	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	35 ppm
Printing colors	Black
Maximum duty cycle	50000 pages per month
Number of print cartridges	1
Page description languages	IBM ProPrinter, PCL 5c, PCL 6, PostScript 3
Processor model	405F5
Processor family	PowerPC
Maximum internal memory	544 MB
Display	LED
Certification	TÜV/GS, CE, PTS, C-Tick
Total input capacity	250 sheets
Maximum input capacity	800 sheets
Maximum number of input trays	3
Multi-Purpose tray input capacity	50 sheets
Custom media width	70 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	148 - 356 mm
Duplex media weight	60 - 105 g/m²
Paper tray media types	Plain paper
Paper tray media weight	60 - 120 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Standard interfaces	USB 2.0
Optional connectivity	Ethernet
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	7.2 W
Power consumption (printing)	544 W
Power consumption (PowerSave)	4.3 W
Media thickness	0.11 mm
Compatible operating systems	Windows OS Linux OS Unix OS Mac OS X 10.2+

Weight and Dimensions

Dimensions (WxDxH)	375 x 393 x 250 mm