Kyocera Ecosys FS-1320D Technical Reference Manual

Chapter 4 Fonts
4-14
The following figure shows all the characters included in the most common symbol set,
HP Roman-8.
Figure 4. 2. Roman-8 Symbol Set
In addition to a large selection of bitmap and scalable fonts, the printing system supports
many symbol sets (also referred to as character sets). The variety of Kyocera supported
symbol sets can be attributed to the numerous printer emulations. Most of those symbol
sets are the same regarding the letters of the alphabet, digits, and basic punctuation
marks, but they differ considerably in their special symbols which lie in the upper half of
the character code table, consisting of character codes 128 through 254 (hex 80 through
FE).
Charts for the available symbol sets in each emulation appear in Chapter 7.
Only the resident fonts can be assigned with a new symbol set. All downloaded fonts
contain specific symbol sets.
International Characters
The INTL (print INTernationaL characters) command provides quick access to printing
characters from a different character set, characters not found in the default symbol set
(US ASCII). By simply using the INTL command with appropriate parameters for lan-
guage and country code, the Kyocera user can access a wide variety of specific charac-
ters.
The following sequence selects the ISO-4 U.K. symbol set for the Swiss721BM8-Roman
font in the HP LaserJet emulation:
!R! UNIT P; CMNT Emulation must be HPLJ;
FONT 13;
INTL 3, 1; CMNT ISO-4 U.K.;
EXIT;
The U.K. symbol set is identical to the US ASCII character set except that it has the
pound currency symbol (\P) in place of the number sign (#).
It should be noted that the symbol set selected by INTL is specific to the currently emu-
lated printer (HP LaserJet in the above example). If the current emulation is changed to
Diablo 630 for the example above (by a SEM command, for example), the INTL com-
mand selects the Diablo U.K. symbol set instead of HP ISO-4 U.K. symbol set.
Selecting HP Symbol Sets
The HP LaserJet emulation has considerably more supported symbol sets than can be
accessed through the INTL command. To establish a symbol set, use one of the follow-
ing commands.

Kyocera Ecosys FS-1320D Specifications

General

Ethernet LAN	No
Network ready	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	35 ppm
Printing colors	Black
Maximum duty cycle	50000 pages per month
Number of print cartridges	1
Page description languages	IBM ProPrinter, PCL 5c, PCL 6, PostScript 3
Processor model	405F5
Processor family	PowerPC
Maximum internal memory	544 MB
Display	LED
Certification	TÜV/GS, CE, PTS, C-Tick
Total input capacity	250 sheets
Maximum input capacity	800 sheets
Maximum number of input trays	3
Multi-Purpose tray input capacity	50 sheets
Custom media width	70 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	148 - 356 mm
Duplex media weight	60 - 105 g/m²
Paper tray media types	Plain paper
Paper tray media weight	60 - 120 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Standard interfaces	USB 2.0
Optional connectivity	Ethernet
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	7.2 W
Power consumption (printing)	544 W
Power consumption (PowerSave)	4.3 W
Media thickness	0.11 mm
Compatible operating systems	Windows OS Linux OS Unix OS Mac OS X 10.2+

Weight and Dimensions

Dimensions (WxDxH)	375 x 393 x 250 mm