Kyocera Ecosys FS-1320D Technical Reference Manual

Chapter 7 Emulation
7-40
!R! FRPO V3, ’TimesNewRoman’;
FRPO U6, 9; FRPO U7, 53;
STAT;
EXIT;
The STAT command in the third line prints a status page that enables the user to confirm
changes made with the preceding sequences. The power-up font and symbol set are
shown in the Interfaces section.
Resource Protection
The resource protection feature is Kyocera’s implementation of the HP’s resource sav-
ing. The feature preserves resources during emulation switching. The protected
resources, user-defined symbol sets and patterns, fonts, and macros, remain intact when
the user switches to and from the HP LaserJet emulation.
A permanent default can be set for resource protection using the following FRPO com-
mand:
!R! FRPO N9, 1; EXIT; or !R! FRPO N9, 2; EXIT;
The
MENU key on the printing system’s control panel may also be used to establish
resource protection.
The following table summarizes the features and functions of the resource protection
mode in the HP LaserJet emulation.
A detailed description of the FRPO N9 command follows. Note that the factory default
setting for the N9 command is 0.
Table 7.19. Resource Protection and FRPO N9 Value
Resource (Property) Emulation N9 = 0 N9 = 1 N9 = 2
Soft fonts (Permanent)
Soft fonts (Temporary)
HPLJ
HPLJ
Deleted
Deleted
Retained
Deleted
Retained
Retained
Macros (Permanent)
Macros (Temporary)
HPLJ
HPLJ
Deleted
Deleted
Retained
Deleted
Retained
Retained
User patterns (Permanent)
User patterns (Temporary)
HPLJ
HPLJ
Deleted
Deleted
Retained
Deleted
Retained
Retained
User symbol set (Permanent)
User symbol set (Temporary)
HPLJ
HPLJ
Deleted
Deleted
Retained
Deleted
Retained
Retained
Print environment HPLJ Deleted Deleted Retained
Permanent dictionary KPDL Retained Retained Retained
N9 = 0, resource protection is off. No resources will be protected during emulation
switching, regardless of whether they are temporary
or permanent. When the user returns to the mode 6
emulation, the print environment will be reset. The
print environment includes items such as number of
copies, orientation, and margins.

Kyocera Ecosys FS-1320D Specifications

General

Ethernet LAN	No
Network ready	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	35 ppm
Printing colors	Black
Maximum duty cycle	50000 pages per month
Number of print cartridges	1
Page description languages	IBM ProPrinter, PCL 5c, PCL 6, PostScript 3
Processor model	405F5
Processor family	PowerPC
Maximum internal memory	544 MB
Display	LED
Certification	TÜV/GS, CE, PTS, C-Tick
Total input capacity	250 sheets
Maximum input capacity	800 sheets
Maximum number of input trays	3
Multi-Purpose tray input capacity	50 sheets
Custom media width	70 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	148 - 356 mm
Duplex media weight	60 - 105 g/m²
Paper tray media types	Plain paper
Paper tray media weight	60 - 120 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Standard interfaces	USB 2.0
Optional connectivity	Ethernet
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	7.2 W
Power consumption (printing)	544 W
Power consumption (PowerSave)	4.3 W
Media thickness	0.11 mm
Compatible operating systems	Windows OS Linux OS Unix OS Mac OS X 10.2+

Weight and Dimensions

Dimensions (WxDxH)	375 x 393 x 250 mm