Kyocera Ecosys FS-1320D Technical Reference Manual

Epson LQ-850 Emulation (Mode 5)
7-21
Epson LQ-850 Emulation (Mode 5)
To set printing system to power up in the LQ-850 emulation with the LQ German symbol
set, command:
!R! FRPO P1, 5; FRPO P3, 2; FRPO U6, 2; EXIT;
The Epson LQ-850 emulation uses 13 symbol sets that include both plain and italic char-
acters. The desired symbol set can be selected with the U6 parameter of the FRPO com-
mand or changed temporarily with the INTL command or from the operator panel keys.
The Epson LQ-850 supports the following Epson symbol sets. Tables of the basic sym-
bols are given at the end of this section.
The factory setting for the symbol set at power-up is IBM PC-8 for all emulation modes.
The printing system supports the Epson graphics character sets (code page tables) of PC
437 (Epson Extended Graphics), PC 850 (Multilingual), PC 860 (Portugal), PC 863
(Canada-French), and PC 865 (Norway). These sets are available only through the use of
Epson control codes. Another Epson control code also provides the US Legal character
set. The Korean character set is not supported.
When power is first switched on or after a reset, the printing system always defaults in
the Courier font (10 cpi). This default font emulates LQ-850’s Draft, 10 cpi and cannot
be changed for the LQ-850 emulation.
The printing system also emulates the other four LQ-850 fonts (five in all). These fonts
can be selected by embedded commands in the word processing software or using an
Epson LQ-850 printer driver. Double-wide and double-high effects are available for all
five fonts.
Table 7.10. Epson LQ-850 Emulation Symbol Sets
Symbol set Message display FRPO commands
U.S.A. LQ US FRPO U6, 0; FRPO U7, 0;
France LQ France FRPO U6, 1; FRPO U7, 0;
Germany LQ Germany FRPO U6, 2; FRPO U7, 0;
U.K. LQ U.K. FRPO U6, 3; FRPO U7, 0;
Denmark 1 LQ Denmark FRPO U6, 4; FRPO U7, 0;
Sweden LQ Sweden FRPO U6, 5; FRPO U7, 0;
Italy LQ Italy FRPO U6, 6; FRPO U7, 0;
Spain 1 LQ Spain FRPO U6, 7; FRPO U7, 0;
Japan LQ Japan FRPO U6, 8; FRPO U7, 0;
Norway LQ Norway FRPO U6, 14; FRPO U7, 0;
Denmark II LQ Denmark2 FRPO U6, 15; FRPO U7, 0;
Spain II LQ Spain2 FRPO U6, 16; FRPO U7, 0;
Latin America Latin America FRPO U6, 17; FRPO U7, 0;

Kyocera Ecosys FS-1320D Specifications

General

Ethernet LAN	No
Network ready	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7 s
Print speed (black, normal quality, A4/US Letter)	35 ppm
Printing colors	Black
Maximum duty cycle	50000 pages per month
Number of print cartridges	1
Page description languages	IBM ProPrinter, PCL 5c, PCL 6, PostScript 3
Processor model	405F5
Processor family	PowerPC
Maximum internal memory	544 MB
Display	LED
Certification	TÜV/GS, CE, PTS, C-Tick
Total input capacity	250 sheets
Maximum input capacity	800 sheets
Maximum number of input trays	3
Multi-Purpose tray input capacity	50 sheets
Custom media width	70 - 215.9 mm
Maximum print size	216 x 356 mm
Custom media length	148 - 356 mm
Duplex media weight	60 - 105 g/m²
Paper tray media types	Plain paper
Paper tray media weight	60 - 120 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Standard interfaces	USB 2.0
Optional connectivity	Ethernet
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	7.2 W
Power consumption (printing)	544 W
Power consumption (PowerSave)	4.3 W
Media thickness	0.11 mm
Compatible operating systems	Windows OS Linux OS Unix OS Mac OS X 10.2+

Weight and Dimensions

Dimensions (WxDxH)	375 x 393 x 250 mm