2P7/2R0/3PN
1-5-29
9. Remove two screws and then remove
the fuser unit forward.
10. Check or replace the fuser unit and refit
all the removed parts.
*: When refitting the fuser unit, perform the
following procedures.
(1)Turn on the power switch while opening the
rear cover after removing the fuser unit.
(2)Turn off the power switch after 5-second or
more progress.
(release state of fixing pressure)
(3)Refit the fuser unit.
Figure 1-5-52
Fuser unit
Screw
Screw
To Next Page
Loading...
Need help?
General