6-79
Operation Panel
Clear Timer
Set the time until manual stapling mode is automatically cancelled.
1 In the Manual Staple menu, press U or V to select Clear Timer.
2 Press [OK]. The Clear Timer screen appears.
3 Use the numeric keys to set the clear time.
The setting range is 5 to 60 seconds (5-second increments).
4 Press [OK]. The clear time setting is stored and the Manual Staple
menu reappears.
Staple Position
Set the default Staple Position.
1 In the Manual Staple menu, press U or V to select Staple
Position.
2 Press [OK]. The Staple Position screen appears.
3 Press U or V to select the desired staple position.
4 Press [OK]. The Staple Position is set and the Manual Staple
menu reappears.
TonerAlert Level (Setting for the alert level for toner addition)
This sets the toner addition alert level displayed.
1 In the Device Common menu, press U or V to select TonerAlert
Level.
2 Press [OK]. The Login screen appears.
Clear Timer:
a
b
(5 - 60)
/5-
sec.
A4 Long Edge Staple on the long side of A4 size.
Letter Long Edge Staple on the long side of letter size.
Staple Position:
a
b
********************
2
Letter Long Edge
[ Exit ]
1
A4 Long Edge
Note When user login administration is set:
• When logged in as an administrator, the log in screen is
not displayed and the TonerAlert Level menu screen
is displayed.
• The setting is not possible when logged in as anyone other
than an administrator. Log in again as an administrator.
Login User Name:
O
b
/******************-
Login Password:
[ Login ]
To Next Page
Loading...
Need help?
General