Preparation before Use
2-38
Operation Panel
Message Display
Messages indicating the status of the various printer operations are displayed on the message display.
Status Information
Error Codes
For information on error code and errors where the printer requires the operator's attention, refer to Error Messages on page
8-6.
Message Meaning
Please wait. The printer is warming up and is not ready.
When the printer is switched on for the first time, this message will take several minutes.
Please wait.
Loading paper...
Appears while paper is being loaded.
Please wait.
Adding toner...
Toner is currently being replenished. This message may be displayed during continuous
printing of a large volume of pages which require a large amount of toner such as with
photographs, etc.
Please wait.
Performing
Color Calibration...
The color calibration function is being performed automatically as you powered on the
printer. You can also execute this function manually on the operation panel.
For details, refer to ColorCalibration on page 6-120.
Ready to print. The printer is ready to print.
Processing. The printer is receiving data to print. This is also shown when the printer is reading a USB
memory or hard disk.
Sleeping. The printer is in Auto Sleep. The printer wakes from Auto Sleep whenever a print job is
received. The printer then warms up and goes on-line.
For details on Auto Sleep, refer to Sleep on page 2-37.
Canceling... Jobs inside the printer are being canceled. To cancel a job, refer to Canceling a Printing
Job on page 2-40.
To Next Page
Loading...
Need help?
General