A-3
Appendix
Paper Feeder (500-sheet x2)
Two additional cassettes identical to the printer’s cassette can be installed in the printer. Paper capacity and loading method
are the same as the standard cassettes. Refer to The standard cassettes on page 2-22 for loading paper.
Large Capacity Feeder (1,500-sheet x 2)
In addition to the printer's cassettes, you can also install an optional large capacity feeder (1,500-sheet x 2) capable of
holding up to 3,000 sheets of A4, B5 or Letter paper. Refer to The Large Capacity Feeder (1,500-sheet x 2) (Option) on
page 2-25 for loading paper.
Side Feeder (3,000-sheet)
In addition to the printer's cassettes, you can also install an optional side feeder (3,000-sheet) capable of holding up to 3,000
sheets of A4, B5 or Letter paper. Refer to Side Feeder (3,000-sheet) (Option) on page 2-27 for loading paper.
Side Feeder (500-sheet x 3)
Three additional cassettes identical to cassette 1 can be installed in the printer. Paper capacity and loading method are the
same as cassette 1.
Large Capacity Side Feeder (500, 1,500-sheet x 2)
In addition to the printer's cassettes, you can also install the additional cassette identical to cassette 1 and an optional feeder
(3,500-sheet) capable of holding up to 3,500 sheets of A4, B5 or Letter paper.
1,000-sheet Finisher
This is a document finisher capable of holding large print runs and of separating and offsetting multiple copies of a printout
into individual copies. It can also staple or hole-punch (optional) the offset printouts.
4,000-sheet Finisher
This is a large-capacity document finisher capable of holding large print runs and of separating and offsetting multiple copies
of a printout into individual copies. It can also staple or hole-punch (optional) the offset printouts.
User can select manual staple by operation button. A mail box and folding unit are also available as options.
Manual staple mode
You can staple copied paper manually without any copying operation. It is useful when you have forgotten to set the staple
sort mode before starting copying, or when you want to staple originals.
Note Manual stapling cannot be executed when the machine is in operation.
If there are no staples when manual stapling is performed, the stapling position lamps and stapling position
key LEDs all blink. Add staples. For details, refer to Replacing Staples on page 7-8
To Next Page
Loading...
Need help?
General