4-61
Operation Panel
Host Name (Check the host name of the machine)
Check the host name of the machine. Host name can be changed from Command Center RX.
1 In the Network menu, press or to select Host Name.
2 Press [OK]. The Host Name screen appears.
Wi-Fi Direct Set (Wi-Fi Direct settings)
Set Wi-Fi Direct.
The options available in the Wi-Fi Direct settings are as follows:
• Wi-Fi Direct (Enable/Disable Wi-Fi Direct)...4-61
• Device Name (Specify the device name.)...4-62
• IP address (Check the IP address of the machine)...4-62
• Auto Disconnect (Auto Disconnect Settings)...4-62
• Disconnect Timer (Setting the Disconnect Time)...4-63
1 In the Network menu, press or to select Wi-Fi Direct Set.
2 Press [OK]. The Wi-Fi Direct Set menu screen appears.
Wi-Fi Direct (Enable/Disable Wi-Fi Direct)
This specified whether Wi-Fi Direct is used.
1 In the Wi-Fi Direct Set menu, press or to select Wi-Fi
Direct.
2 Press [OK]. The Wi-Fi Direct screen appears.
3 Press or to select On or Off.
4 Press [OK]. The Wi-Fi Direct setting is set and the Wi-Fi
Direct Set menu reappears.
Note Wi-Fi Direct Set is only displayed when the optional Wireless Network Interface Kit (IB-36) is installed.
Wi-Fi Direct Set:
Wi-Fi Direct
Exit
Device Name
01
02
IP Address
03