Kyocera FS-1025MFP User Manual

9-2
Troubleshooting
Solving Malfunctions
The table below provides general guidelines for problem solving.
If a problem occurs with your machine, look into the checkpoints and perform procedures indicated on the following pages.
If the problem persists, contact your service representative.
Symptom Checkpoints Corrective Actions
Reference
Page
The screen does not
respond when the power
switch is turned on.
Check the power cord. Connect both ends of the power cord
securely.
2-3
Pressing [Start] does not
produce copies.
Is there a message on the machine
screen, KYOCERA Client Tool, or the
Status Monitor?
Determine the appropriate response to
the message and respond accordingly.
9-8
Is the machine in Sleep mode? Press any key on the operation panel
to recover the machine from Sleep
mode.
—
The indicators are off
and the motor is not
working.
Check the power cord. Connect both ends of the power cord
securely.
2-3
— Turn on the power. —
The machine will not
print from the computer.
Check the power cord. Connect both ends of the power cord
securely.
2-3
Is the machine powered on? Turn on the power. —
Are the interface cable connected? Connect the correct interface cable
securely.
2-2
Was the machine powered on before
the interface cable was connected?
Power on the machine after
connecting the interface cable.
2-2
Is the print job paused? Resume printing. —
Does an error message appear in the
display on the operation panel?
Using the information on page 9-8,
check if an error has occurred and
clear the error.
If the indicators show a pattern not
described on page 9-8, turn the power
off and then on again. Print the job
again.
9-8
Check if a status page can be printed. If the status page was printed
successfully, there may be a problem
with the connection to the computer.
Check the connection. To print the
status page, refer to Printing the
Status Page on page 2-58.
2-2
The machine prints a
status page but data
from the computer is not
being printed.
Check the interface cable. Connect both ends of the interface
cable securely. Try replacing the
interface cable.
2-2
Check program files and application
software.
Try printing another file or using
another print command. If the problem
occurs with a specific file or
application, check the printer settings
for that application.
—

Kyocera FS-1025MFP Specifications

General

DVD/CD printing	No
Duplex printing	Yes
Print technology	Laser
Time to first page (black, normal)	7.5 s
Print speed (black, normal quality, A4/US Letter)	25 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
N-in-1 copy function (N=)	2, 4
Time to first copy (black, normal)	13 s
Scan to	USB
Grayscale levels	256
Maximum scan area	Legal (216 x 356) mm
Scan speed (black)	18 ppm
Scan speed (color)	6 ppm
Image formats supported	BMP, JPG, PNG, TIF
Document formats supported	PDF
Faxing	Mono faxing
Printing colors	Black
Maximum duty cycle	20000 pages per month
Number of print cartridges	1
Paper input type	Cassette
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	251 sheets
Maximum print size	216 x 356 mm
Duplex media weight	60 - 120 g/m²
Paper tray media types	Plain paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Display	LCD
Product color	Black, Grey
Market positioning	Business
Display number of lines	2 lines
Standard interfaces	Ethernet, USB 2.0
Mobile printing technologies	Not supported
Processor family	ARM
Sound power level (standby)	29 dB
Sound pressure level (copying)	50 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (PowerSave)	3 W
Power consumption (average operating)	342 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	361 mm
Width	390 mm
Height	362 mm