Indicators
D-4
Paper jam
Paper jam.
Refer to the Installation Manual or Chapter 5 in this
manual, and remove the jammed paper.
(In this example, the printer’s cassette is selected).
Top cover open
The printer’s top cover is open.
Close firmly.
(In this example, the printer’s cassette is selected).
Toner status
Toner is almost exhausted.
(In this example, the printer’s cassette is selected).
Toner exhausted.
Replace the toner container using a new toner kit. The
printer does not operate.
(Refer to the Installation Manual or Chapter 4 in this
manual, and replace the toner container.)
(In this example, the printer’s cassette is selected).
Memory overflow
The total amount of the data received by the printer
exceeds the printer’s internal memory. Try adding
more memory (expansion RAM). Press the ON LINE/
STATUS key to resume printing. You can abandon
printing by the SLEEP/CANCEL key.
Print Overrun
The data transferred to the printer was too complex to
print on a page. Press the ON LINE/STATUS key to
resume printing. (The page may break in some pages.)
You can abandon printing by the SLEEP/CANCEL
key.
Note: Send the following command to the printer after
this error has occurred:
!R! FRPO R5, 0; EXIT;
to release the page protect mode.
To Next Page
Loading...
Need help?
General